Home » Mixers

Product Details

View Larger Image
Aviom AN-16/o v.4 Output Module
SKU: 559
List Price: $1470.00
Our Price: $1395.00
Your Savings: $75.00
Product Note: Allow 3 Business Days for Processing and Handling
Add To Wishlist Add To Registry


The AN-16/o v.4 Output Module connects to any Pro16 input module, console card, or A-Net distributor and provides 16 balanced TRS line-level analog outputs. Five output levels, from mic to +24dBu, are available to easily accommodate the level requirements of the gear its output signals are being connected to.

Use the AN-16/o v.4 anywhere analog outputs are required: on stage or at FOH in a digital snake, in the studio, for a recording split, or in even the most complex audio networks. Adding a digital split to a Pro16 system is as simple as connecting an additional AN-16/o v.4 Output Module.

Compatibility Note: AN-16/o v.4 Output Modules with serial numbers 51162 and lower are compatible with only Pro16 A-Net and not Pro16e A-Net. The Pro16e version of A-Net is used by the AN-16/i v.2 as well as the D800 and D400 series of A-NetDistributors.



  • 16 balanced mic- or line-level outputs 

  • Four-position output level switch per channel pair

  •  +24, +18, and +4dBu line-level, or mic-level outputs 

  • 48kHz, 24-bit D/A converters 

  • Unlimited splits and digital copies 



Audio Outputs

16 channels, balanced


DB25 multipin connectors (2); Tascam® analog audio pinout
Impedance balanced output for mic, +4dBu, and +18dBu; differential output for +24dBu

D/A Conversion

48kHz sample rate, 24 bit

Frequency Response


A-Net Input/Output

one EtherCon Category 5 (RJ45 connector)

A-Net Expansion

one EtherCon Category 5 (RJ45 connector)

Output Level Settings

Four-position switch, per channel pair;
+24dBu, +18dBu, +4dBu, and Mic

Channel LED Indicators

Signal Present and Clip, per channel


LEDs; green: Signal Present; red: Clip; per channel

Maximum Output Level


Output Impedance

226 ohms (+18dBu, +24dBu); 100 ohms (+4dBu and mic)

Freq. Response

4Hz-22kHz +0.2dB/-3dB


< 0.004%



Bit Error Rate (BER)


Signal to Noise (unweighted)

92dB typical, A/D to D/A
Measured from AN-16/i to AN-16/o v.4 Output Module

Digital Connections

A-Net In: 1; A-Net Out: 1; A-Net Expansion: 1;
Neutrik EtherCon connectors

A-Net Pro16

A-Net Expansion combines two A-Net streams (32 channels of audio) onto one Cat-5e cable;
uses unshielded Cat-5e UTP (or better) cable


<0.620 msec (measured from analog input to analog output)

Power Supply
      Input Voltage
      Output Voltage
      Plug Size

External, DC, universal switching type
100-240 volts, 50/60Hz, 30VA
24 VDC, 0.5 amp
2 mm


24 VDC, 500mA


19" (482.6 mm) wide x 5.75" (146 mm) deep;
1U high


6.8 lbs. (3.08 kg)


SB4 System Bridge; used to combine up to four A-Net streams for transmission over one Cat-5e cable



Add Your Review
Currently there are no reviews for this product. Share your opinion with others, be the first to write a review.
Add Your Review

Tell a Friend

Your Name:
Your Email:
Friends Name:
Friends Email:
Verification: (Reload Image)

Cart Contents

Your cart is currently empty
Subtotal: $0.00




Sale Item

No sale items at this time.

Valid XHTML 1.0 Transitional